Dust, fingerprints and scratches are the worst enemies of plastic surfaces. But direct sunlight and heat also cause problems for the material. If plastic is not optimally and regularly cared for, the surface becomes downright greasy and brittle and also fades. This doesn't have to be the case: with the right care, plastic surfaces stay beautiful for longer.
The perfect cockpit care: How often should you clean the plastic surfaces in the car!
Plastic surfaces inside a car should be thoroughly cleaned every four weeks. Experts even recommend that this should be practiced even more frequently in humid climates. If you follow this advice, the surfaces will be optimally cared for and coarse dirt and unsightly cracks have no chance of developing. To protect against harmful environmental influences and normal wear and tear, the plastic surfaces should also be sealed every two to three months.
Car care interior: you have to pay attention to this!
When buying plastic care, it is particularly important that you choose silicone-free products. Because they are extremely economical and ensure grease-free and smooth surfaces on doors, fittings, etc. In addition, the care should ideally protect against UV radiation and also be waterproof.
Also make sure that all surfaces are dry after cleaning before operating the vehicle. If they are still damp, dust and dirt particles immediately stick to the material again. Another tip: always apply the cleaner and care product to the entire area. In this way you avoid differences in brightness and color in the interior of the car. Therefore, the following applies: Always work on a coherent surface first and then move on to the next.
Important: Special care must be taken when cleaning the steering wheel and the dashboard on the passenger side. This is where the airbags are located. If you treat them with the wrong means, it can happen that the predetermined breaking points suffer.
That's why you should care for the leather and imitation leather upholstery in the car regularly!
In addition to animal skin and tanning agents, natural leather consists of liquid, fat and dyes.
So that the natural material does not become brittle and cracked, you should also treat the car seats to regular care. In order for leather and artificial leather to retain its radiance, it also needs optimal regreasing in addition to cleaning. The same applies here: Harsh care products ruin the material and act counterproductively. More productive and environmentally friendly are sustainable products that penetrate deep into the material with the help of natural ingredients such as beeswax and wool fat and provide it with everything it needs for the hardships of everyday life.
In direct comparison with new leather that has just been tanned and perfectly prepared by a specialist, older leather requires more attention. Depending on the wear and tear, we recommend that you give your real and imitation leather a thorough cleaning and moisturizing treatment every three months. This prevents your leather in the car from becoming dry, cracked and brittle due to external influences such as UV light and stress.
Remember: Less is often more, especially when it comes to care! Always apply the leather care milk or wax sparingly. A wafer-thin view is completely sufficient for high-quality products. Because if you overdo it, the care cannot be fully absorbed and unsightly edges can appear. You should also make sure that you always use the product across the board. Always apply the care from seam to seam and don't forget the gear stick and the steering wheel. In this way you prevent color differences and your car seats & Co. look beautiful and are well maintained.
Car plastic care: 4 tips for perfect cleaning and care
The fact is that regular care is required to ensure that your car is in good condition inside and out. Without them, the wear and tear of plastic will accelerate in the blink of an eye. The following tips will help you prevent this:
- Always remove coarse soiling immediately.
- You should avoid aggressive cleaning products and disinfectants.
- Direct UV radiation should be blocked to prevent the plastic surfaces from fading.
-
When cleaning and caring for plastic, soft sponges or microfiber cloths should always be used. This prevents the material from being damaged.
Car plastic care: the outside is just as important as the inside!
Plastic surfaces are not only exposed to various influences inside your car. The fact is: their exterior in particular puts them to a tough test all year round due to the various environmental influences. They have to withstand high temperatures and strong UV radiation in summer and icy cold and road salt in winter. It would be impossible without perfect protection in the form of cleaning and care. The end of the story: the plastic fades and becomes brittle. In the worst case, it can even go so far that stress cracks form and the part has to be replaced.
But incorrect treatment with chemical cleaners also attacks the material. Due to their superficial mode of action and the aggressive ingredients, they allow the important plasticizers to escape and the plastic to lose its original elasticity. To prevent this from happening, you should pay attention to the following things when car care:
- The first thing to do is a thorough car wash. Only use sustainable products such as the Emma Grün Universal Cleaner for this. You should then rub all plastic surfaces dry with a soft cloth.
- Now put some plastic cleaner on the application sponge and evenly apply a thin layer to the surfaces to be treated.
-
Leave to act for a short time and finally remove the residue with a clean microfiber cloth.
It doesn't take much to get the beautiful look and feel of plastic surfaces. As you have already noticed, however, regular care is the be-all and end-all. All you need are sustainable products that can also be used in a variety of ways, protect and care for your sensitive surfaces and are also good for the environment.
